THE
following are the instructions necessary for fitting brake-shoe
anti-squeak weights on the Morris Minor, Morris Ten, Morris-Cowley,
Morris Major and Morris Oxford Models. Morris Minor Models
1.
Remove road wheels, brake-drums and brake-shoes.
2. Place a lead weight on brake-shoe in position as shown in sketch
hereunder, making sure that clearance exists at both sides of
weight, and drill two 1/4 in. diameter holes through brake-shoe
web, using the lead weight as a jig.
3.
Assemble each brake-shoe with one lead weight on the outside,
locating it with two pins and springs. The pins arc fitted first
of all with a brass washer, and passed through the weight and
shoe. The spring, cup washer and split pin can then be added to
each pin, and the shoes, brake-drums, etc., replaced. It is advisable
to clean up the linings with a rough file before replacing.
